Stove and Heating Products
A range of high-performance solutions for the industrial and domestic heating and cooking industry. Specially formulated for stove and flue manufacture, installation and repair.
If you are unable to find a solution, or would like to check a product's details, please contact us and we'll be more than happy to help.
Box of 12 x 300ml cartridges. High Temperature flue adhesive sealant.
- Developed for improved cohesion, adhesion and strength
- Economical in cost and application
- Withstands temperatures to +1000°C. Strong adhesive properties at all temperatures
- Fortafix HT Flueseal is water based and does not contain hydrocarbon resins or solvents
- Hardens by air drying and operational heat which improves and strengthens seals and joints
- Water resistance will be improved by the application of heat
- Box of 12 x 300ml cartridges
Box of 12 x 400ml canisters. High Temperature Matte Black Aerosol.
- Provides a long lasting decorative coating for iron and steel
- Easy to use aerosol canister
- One coat spray application
- Heat resistant up to 650°C for atmospheric exposure.
- Good adhesion on well-prepared (blast-cleaned) metal substrates.
- Good weather resistance after stoving
- Good opacity
Box of 12 x 400ml units. Premium Stove & Oven Glass Cleaner.
- Concentrated fast acting formula removes carbon & grease deposits effectively to leave a gleaming finish.
- For use on wood, coal or oil burning stoves, glass fire screens or fronts.
- Removes all the deposits sometimes left by incomplete combustion of coal or wood in solid fuel stoves.
- It clings to vertical surfaces to quickly dissolve smoke stains and tar/creosote deposits.
- The solution is safe to use on all hard surfaces; simply spray on, lightly agitate with a suitable brush or cloth and then wipe off with damp cloth
- Box of 12 x 400ml units
Fire Cement is a ready-to-use putty. Water based pliable adhesive fire cement.
- Water based pliable adhesive fire cement.
- Strong adhesion at all temperatures up to 1600°C.
- Designed for use in the assembly and instillation of gas/multi-fuel heating appliances.
- Does not exude oil or stain most absorbent materials.
- Odourless and non-toxic.
- A maximum continuous operating temperature of up to1600ºC.
- Available in easy to use cartridge
Fortafix TemCem fire cement. Water based pliable adhesive fire cement.
- Water based pliable adhesive fire cement.
- Strong adhesion at all temperatures to +1400°C.
- Designed for use in the assembly and instillation of gas/multi-fuel heating appliances.
- Does not exude oil or stain most absorbent materials.
- Odourless and non-toxic.
- A maximum continuous operating temperature to +1400ºC.
- Available in easy to use cartridge
Box of 12 x 300ml (or 80ml) cartridges. A highly engineered RTV Silicone Sealant / Adhesive offering continuous resistance to 300°C
- Flexible form -60°C to 300°C
- Continuous operation to 300°C
- Waterproof
- Resistant to oxidation and many oils, chemicals, and solvents
- Good Electrical Insulation
- Colour – Black or White (food grade)
- Box of 12 x 300ml cartridges
Box of 12 x 300ml cartridges. A Temperature resistant RTV Silicone Sealant / Adhesive offering resistance up to 300°C
- Flexible
- Resistance to 300°C
- Waterproof
- Resilient
- Colour – Black
- Box of 12 x 300ml cartridges
Fortafix premium rope kit. 2m quality glass fibre rope.
- Durable high temperature resisting flexible silicone adhesive sealant
- Temperature rated to 300°C
- Supplied as an 80 ml squeezable tube
- 2 metres of U.K. manufactured high quality glass fibre rope
- A range of diameters 6mm 8mm 10mm 12mm
- High temperature resisting ‘end seal’ tape
- Protective gloves
Water based resin primer. A water based resin primer for surface preparation.
- Formulated for use as a primer on mineral boards and high suction substrates e.g. Calcium Silicate Board to prevent problems caused by water uptake by the board – which causes a rapid loss of workability and cracking to the applied plaster coating.
- Fortafix MinPrime G100 can also be used to toughen the surface of (for instance) low density calcium silicate board – and reduce surface dusting and fracture.
Box of 12 x 400ml units. USP10 Surface Preparation Spray.
- Suitable for glass, metals, concrete, most plastics and painted surfaces.
- Efficient removal of grease, dirt, debris and other contamination.
- Leaves no residue to allow fast application of adhesive/sealant.
- Solvent based hydrocarbon with butane/propane propellant for fast evaporation.
- Non-conductive.
- Box of 12 x 400ml units
