Fortafix Cements & Potting Compounds
Temperature resistant to 1600C the Fortafix cement range is unsurpassed for protection and encapsulation.
If you are unable to find a solution, or would like to check a product's details, please contact us and we'll be more than happy to help.
Fire Cement is a ready-to-use putty. Water based pliable adhesive fire cement.
- Water based pliable adhesive fire cement.
- Strong adhesion at all temperatures up to 1600°C.
- Designed for use in the assembly and instillation of gas/multi-fuel heating appliances.
- Does not exude oil or stain most absorbent materials.
- Odourless and non-toxic.
- A maximum continuous operating temperature of up to1600ºC.
- Available in easy to use cartridge
Fortafix TemCem fire cement. Water based pliable adhesive fire cement.
- Water based pliable adhesive fire cement.
- Strong adhesion at all temperatures to +1400°C.
- Designed for use in the assembly and instillation of gas/multi-fuel heating appliances.
- Does not exude oil or stain most absorbent materials.
- Odourless and non-toxic.
- A maximum continuous operating temperature to +1400ºC.
- Available in easy to use cartridge
QS/B4 2 part filler/binder system, which forms a ceramic adhesive/cement.
- 2 part Filler/Binder system, which forms a ceramic adhesive/cement
- Water based
- Can be mixed to required viscosity
- Chemical setting action
- Designed for bonding, assembling, sealing, jointing or repairing glass, ceramics, metals, quartz etc
- Possesses excellent thermal, electrical and mechanical properties
- Water resistant when cured
- A maximum continuous operating temperature of >1200ºC
LQ/S6 2 part Filler/Binder system, which forms a ceramic adhesive/cement
- 2 part Filler/Binder system, which forms a Quartz based ceramic adhesive/cement
- Water based
- Chemical setting action
- Designed for bonding, assembling, sealing, jointing or repairing glass, ceramics, metals, quartz etc
- Possesses excellent thermal, electrical and mechanical properties
- A maximum continuous operating temperature of >1000ºC
AL/CS 2 Part chemical set. Available as a Filler and Binder Pack.
- Suitable for Bonding, Thin Films/Coatings, Thick Sections and Potting/ Encapsulation
- Higher thermal expansion rate
- High thermal conductivity
- High tensile and compression strength
- Maximum Continuous Service Temperature: >1400°C
- Available as a Filler and Binder Pack which when mixed forms a viscous white paste
Chromix Gas Seal Part chemical set. 2 part Filler/Binder system, which forms a ceramic adhesive/cement.
- 2 part Filler/Binder system, which forms a ceramic based adhesive/cement
- Water based
- Chemical setting action
- Heat resistant filler for flaws in castings and mouldings
- High Temperature Gas tight seal
- Possesses excellent thermal, electrical and mechanical properties
- A maximum continuous operating temperature of 1400ºC